Suction pressure indication, including connection, d=40 mm
Suction pressure indicator, consisting of a high-quality, dampened pressure gauge (display range -1 to +3 bar), rear hose connection including compression fitting for connecting the polyamide hose s-pa-4.
Please mount the hose connection with liquid thread lock p-97216 or ptfe tape.
The suction indicator is connected via hose s-pa-4 to the desired point for measuring the fuel pressure in front of the injection pump. The threaded pieces on the back must be sealed during assembly. You can use either sealing tape ptfe or liquid thread lock p-97216.
You need
for all distributor injection pumps with M12x1.5 IN screw
- 1 x double banjo bolt dhs-m12
- 1 x swivel grommet ring-m12-4 and
- 3 x flat sealing rings al-m12.
Alternatively, the negative pressure in 6 or 8 mm ID hoses can be measured using reducing T-pieces t-k-6-4-6 or t-k-8-4-8.
| material case: | stainless steel |
| weight: | 82 g |
| depth: | 56 mm |
| diameter (body): | 40 mm |
| attenuation: | Glyzerin |
| connector: | 1/4" external thread with hose connector |
